// ========== Copyright Header Begin ==========================================
//
// OpenSPARC T1 Processor File: bw_io_dtl_padx12.v
// Copyright (c) 2006 Sun Microsystems, Inc. All Rights Reserved.
// DO NOT ALTER OR REMOVE COPYRIGHT NOTICES.
//
// The above named program is free software; you can redistribute it and/or
// modify it under the terms of the GNU General Public
// License version 2 as published by the Free Software Foundation.
//
// The above named program is distributed in the hope that it will be
// useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public
// License along with this work; if not, write to the Free Software
// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
//
// ========== Copyright Header End ============================================
![[Up: pad_jbusl I61]](v2html-up.gif)
module bw_io_dtl_padx12
(ps_select_buf ,bypass_en_buf ,serial_out ,
serial_in ,bso ,to_core ,so ,pad ,por_l_buf ,oe_buf ,reset_l_buf ,
update_dr_buf ,cbu1 ,cbd1 ,up_open_buf ,bsr_si ,mode_ctl_buf ,
se_buf ,shift_dr_buf ,hiz_l_buf ,si ,rst_val_dn_buf ,down_25_buf ,
clk ,data ,clock_dr_buf ,rst_val_up_buf ,sel_bypass_buf ,vddo ,cbu0
,cbd0 ,ref ,rst_io_l_buf );
output [11:0] serial_out ;
output [11:0] to_core ;
input [1:0] ps_select_buf ;
input [1:0] bypass_en_buf ;
input [11:0] serial_in ;
input [1:0] por_l_buf ;
input [1:0] oe_buf ;
input [1:0] reset_l_buf ;
input [1:0] update_dr_buf ;
input [8:1] cbu1 ;
input [8:1] cbd1 ;
input [1:0] up_open_buf ;
input [1:0] mode_ctl_buf ;
input [1:0] se_buf ;
input [1:0] shift_dr_buf ;
input [1:0] hiz_l_buf ;
input [1:0] rst_val_dn_buf ;
input [1:0] down_25_buf ;
input [11:0] data ;
input [1:0] clock_dr_buf ;
input [1:0] rst_val_up_buf ;
input [1:0] sel_bypass_buf ;
input [8:1] cbu0 ;
input [8:1] cbd0 ;
input [1:0] rst_io_l_buf ;
inout [11:0] pad ;
output bso ;
output so ;
input bsr_si ;
input si ;
input clk ;
input vddo ;
input ref ;
supply1 vdd ;
supply0 vss ;
wire [11:1] bscan ;
wire [11:1] scan ;
wire ck0 ;
wire ck1 ;
wire ck2 ;
wire ck3 ;
bw_io_dtl_pad DTL_0_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (scan[1] ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (serial_out[1] ),
.serial_in (serial_in[0] ),
.update_dr (update_dr_buf[1] ),
.clk (ck3 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bscan[1] ),
.serial_out (serial_out[0] ),
.bsr_si (bscan[5] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[5] ),
.oe (oe_buf[1] ),
.data (data[0] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[0] ),
.ref (ref ),
.pad (pad[0] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_8_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (scan[8] ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (serial_out[9] ),
.serial_in (serial_in[8] ),
.update_dr (update_dr_buf[1] ),
.clk (ck2 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bscan[8] ),
.serial_out (serial_out[8] ),
.bsr_si (bscan[3] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[3] ),
.oe (oe_buf[1] ),
.data (data[8] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[8] ),
.ref (ref ),
.pad (pad[8] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_1_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (so ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (vss ),
.serial_in (serial_in[1] ),
.update_dr (update_dr_buf[1] ),
.clk (ck3 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bso ),
.serial_out (serial_out[1] ),
.bsr_si (bscan[1] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[1] ),
.oe (oe_buf[1] ),
.data (data[1] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[1] ),
.ref (ref ),
.pad (pad[1] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_9_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (scan[9] ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (vss ),
.serial_in (serial_in[9] ),
.update_dr (update_dr_buf[1] ),
.clk (ck2 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bscan[9] ),
.serial_out (serial_out[9] ),
.bsr_si (bscan[8] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[8] ),
.oe (oe_buf[1] ),
.data (data[9] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[9] ),
.ref (ref ),
.pad (pad[9] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_2_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[2] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (serial_out[3] ),
.serial_in (serial_in[2] ),
.update_dr (update_dr_buf[0] ),
.clk (ck1 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[2] ),
.serial_out (serial_out[2] ),
.bsr_si (bscan[7] ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (scan[7] ),
.oe (oe_buf[0] ),
.data (data[2] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[2] ),
.ref (ref ),
.pad (pad[2] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
bw_io_dtl_pad DTL_3_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[3] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (vss ),
.serial_in (serial_in[3] ),
.update_dr (update_dr_buf[0] ),
.clk (ck1 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[3] ),
.serial_out (serial_out[3] ),
.bsr_si (bscan[2] ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (scan[2] ),
.oe (oe_buf[0] ),
.data (data[3] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[3] ),
.ref (ref ),
.pad (pad[3] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
bw_io_dtl_pad DTL_11_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[11] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (vss ),
.serial_in (serial_in[11] ),
.update_dr (update_dr_buf[0] ),
.clk (ck0 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[11] ),
.serial_out (serial_out[11] ),
.bsr_si (bscan[10] ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (scan[10] ),
.oe (oe_buf[0] ),
.data (data[11] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[11] ),
.ref (ref ),
.pad (pad[11] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
bw_io_dtl_pad DTL_4_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (scan[4] ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (serial_out[5] ),
.serial_in (serial_in[4] ),
.update_dr (update_dr_buf[1] ),
.clk (ck3 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bscan[4] ),
.serial_out (serial_out[4] ),
.bsr_si (bscan[9] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[9] ),
.oe (oe_buf[1] ),
.data (data[4] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[4] ),
.ref (ref ),
.pad (pad[4] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_10_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[10] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (serial_out[11] ),
.serial_in (serial_in[10] ),
.update_dr (update_dr_buf[0] ),
.clk (ck0 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[10] ),
.serial_out (serial_out[10] ),
.bsr_si (bsr_si ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (si ),
.oe (oe_buf[0] ),
.data (data[10] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[10] ),
.ref (ref ),
.pad (pad[10] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
bw_io_dtl_pad DTL_5_ (
.cbu ({cbu1 } ),
.cbd ({cbd1 } ),
.bypass_enable (bypass_en_buf[1] ),
.so (scan[5] ),
.por_l (por_l_buf[1] ),
.clock_dr (clock_dr_buf[1] ),
.bypass_in (vss ),
.serial_in (serial_in[5] ),
.update_dr (update_dr_buf[1] ),
.clk (ck2 ),
.reset_l (reset_l_buf[1] ),
.hiz_l (hiz_l_buf[1] ),
.ps_select (ps_select_buf[1] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[1] ),
.rst_io_l (rst_io_l_buf[1] ),
.rst_val_up (rst_val_up_buf[1] ),
.bso (bscan[5] ),
.serial_out (serial_out[5] ),
.bsr_si (bscan[4] ),
.rst_val_dn (rst_val_dn_buf[1] ),
.mode_ctl (mode_ctl_buf[1] ),
.si (scan[4] ),
.oe (oe_buf[1] ),
.data (data[5] ),
.se (se_buf[1] ),
.up_open (up_open_buf[1] ),
.down_25 (down_25_buf[1] ),
.to_core (to_core[5] ),
.ref (ref ),
.pad (pad[5] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[1] ) );
bw_io_dtl_pad DTL_6_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[6] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (serial_out[7] ),
.serial_in (serial_in[6] ),
.update_dr (update_dr_buf[0] ),
.clk (ck1 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vdd ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[6] ),
.serial_out (serial_out[6] ),
.bsr_si (bscan[11] ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (scan[11] ),
.oe (oe_buf[0] ),
.data (data[6] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[6] ),
.ref (ref ),
.pad (pad[6] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
bw_u1_ckbuf_30x I46 (
.clk (ck0 ),
.rclk (clk ) );
bw_u1_ckbuf_30x I47 (
.clk (ck2 ),
.rclk (clk ) );
bw_u1_ckbuf_30x I48 (
.clk (ck3 ),
.rclk (clk ) );
bw_u1_ckbuf_30x I49 (
.clk (ck1 ),
.rclk (clk ) );
bw_io_dtl_pad DTL_7_ (
.cbu ({cbu0 } ),
.cbd ({cbd0 } ),
.bypass_enable (bypass_en_buf[0] ),
.so (scan[7] ),
.por_l (por_l_buf[0] ),
.clock_dr (clock_dr_buf[0] ),
.bypass_in (vss ),
.serial_in (serial_in[7] ),
.update_dr (update_dr_buf[0] ),
.clk (ck0 ),
.reset_l (reset_l_buf[0] ),
.hiz_l (hiz_l_buf[0] ),
.ps_select (ps_select_buf[0] ),
.out_type (vss ),
.shift_dr (shift_dr_buf[0] ),
.rst_io_l (rst_io_l_buf[0] ),
.rst_val_up (rst_val_up_buf[0] ),
.bso (bscan[7] ),
.serial_out (serial_out[7] ),
.bsr_si (bscan[6] ),
.rst_val_dn (rst_val_dn_buf[0] ),
.mode_ctl (mode_ctl_buf[0] ),
.si (scan[6] ),
.oe (oe_buf[0] ),
.data (data[7] ),
.se (se_buf[0] ),
.up_open (up_open_buf[0] ),
.down_25 (down_25_buf[0] ),
.to_core (to_core[7] ),
.ref (ref ),
.pad (pad[7] ),
.vddo (vddo ),
.sel_bypass (sel_bypass_buf[0] ) );
endmodule